Your cart
There are no more items in your cart
THOR is a very powerful electric piston pump suitable for very thick materials such as polyurethane-based insulators, fly-ash, epoxy, etc.
THOR airless - The GOD of airless
THOR is the most powerful electric piston pump in the world ! Suitable for high viscosity materials like plaster, polyurethane, bitumen, epoxy, fire proof, water or solvent base products etc.
Sucction rigit system and filter
Electric
Motor: | Single phase |
| Volt | 230V / 50Hz |
| Power: | 3,75 ΗΡ - 2,8kW |
| Weight: | 76 kg |
| Maximum Pressure: | 230 Bar |
| Max tip size: | .051'' |
| Flow rate: | 7,5 L/min |
Highest performance airless in the world !
THOR is the GOD of airless! To most powerful single phase airless in the global market. Electric piston pump suitable for high viscosity materials such as polyurethane-based insulators, stucco, epoxy, bitumen etc.
Thor is suitable for all materials with low to very high viscosity.
Materials: powder stucco or ready-mixed stucco, polyurethane based insulating materials, anti-fouling , fire proof, thixotropic, bitumen, products with high viscosity, water, solvent, nitro, xylene, gasoline with low or no dilution
THOR can take up to 100 m of hose, spraying with .051 '' nozzle viscous materials with a adjustable pressure up to 230 bar. It can also spray with two spray guns with spray nozzles 023 ''. It is designed to be easy to clean and maintain.
Ergonomic base with 2 wheels for easy transportation.
Back base for hose
Electronic control with multi control
Pump filter
Suction filter
Recirculation HP valve
Relief valve
1 + 1 years factory amd espray warranty!!
What is airless electric piston pump?
- WORKING PRINCIPLE
An electric piston pump is used for high pressure painting without air (from this process derives the term "airless - airless»). The pump is controlled by an electric motor in combination with a reducer. An eccentric shaft and a piston enabling to obtain the reciprocating movement necessary for operation of the "pumping group" piston. The movement of the piston generates a "gap" .The material is pushed towards the pump outlet and then sent to the gun through the flexible hose. An electronic device beside the reduction box, is used to regulate and control the pressure of the material leaving the pump . When the pump reaches the set value, the motor stops and starts again when the price is reduced .. A safety valve overpressure guarantees the absolute reliability of the equipment.
- WORKING PRINCIPLE
