Peristaltic mortar pumps for Spray , Joint , Injection applications
P120 Dynamic
High power, with flow rates up to 18 l/min and low power consumption at just 1.5 kW, Dynamics P/120 is perfectly suited to all construction site requirements.
TECHNICAL DATA SHEET
DC motor | 1500 W |
Voltage | 230 Vca, 50 Hz |
Hopper | 20 lt inox |
Flow rate | up to 18 l/min |
Maximum pressure | 25 bars |
Grain size | up to 5mm |
Max Hose length | 40mt * |
Sizes | 40x68x50 |
Weight | 40 kg |
Pump type | Peristaltic |
SPRAYING
High power allows the system to work also with high-tack materials and makes it possible to cover long distances.
PLASTERING AND RENDERING
Thanks to the many guns and accessories available the system can be used for spray application of premixes and traditional mortars, with particle size of 0 - 5 mm to obtain the desired finish quality.
FILLING
Perfect for injecting cement slip and materials of various types into walls, micropiles and prestressed structures. Designed to consolidate or seal the surface of masonry, rock, damns and tunnels.
INJECTION
with 0 to 6 bar pressure control
POINTING
DYNAMICS P120 can fill joints with premixed plasters and traditional mortars, with particle size of 0 - 5 mm, on brickwork, facing brick, porphyry blocks, slabs of various types, stonework and pebble of various sizes.
ADVANTAGES
Suitable for all kinds of work sites.
Thanks to its compact size and low weight, DYNAMICS P120 is perfect for all work site needs.
Easy to use, this unit is also suitable for home users and unskilled site labour.
Easy maintenance and cleaning.
HIGH POWER
LOW CONSUMPTION
USES JUST 1.5 kW
MAGIC P100 Power
MAGIC P100 can spray a range of different materials, including high dense mortars. Depending on the material, the grout hose can be up to 20 m in length.
TECHNICAL DATA SHEET
DC motor | 1100 W |
Voltage | 230 Vca, 50 Hz |
Hopper | 35 lt |
Flow rate | up to 12 l/min |
Maximum pressure | 15 bars |
Grain size | up to 5mm |
Max Hose length | 20mt * |
Sizes | 40x60x60 |
Weight | 30 kg |
Pump type | Peristaltic |
SPRAYING
Its high power means MAGIC PLUS P100 can spray a range of different materials, including dense slurries. Depending on the material, the grout hose can be up to 20 m in length.
Thanks to the many guns and accessories available the system can be used for spray application of premixes and traditional mortars, with particle size of 0 - 5 mm to obtain the desired finish quality.
FILLING
Perfect for injecting cement slip and materials of various types into walls, micropiles and prestressed structures.
Designed to consolidate or seal the surface of masonry, rock, damns and tunnels.
INJECTIONS
with 0 to 6 pressure control
POINTING
MAGIC PLUS P100 can work with premixed plasters and traditional mortars, with particle size of 0 - 5 mm, on brickwork, facing brick, porphyry blocks, slabs of various types, stonework and pebble of various sizes.
ADVANTAGES
High power to adapt to all kinds of work sites.
Thanks to its compact size and low weight, MAGIC PLUS P100 is perfect for all work site needs.
Easy to use, this unit is also suitable for home users and unskilled site labour.
Easy maintenance and cleaning.
P140 Two components 1:1 ratio
MAGIC PLUS P140 can spray a range of different materials, including high dense mortars. Depending on the material, the grout hose can be up to 20 m in length.
TECHNICAL DATA SHEET
DC motor | 1100 W |
Voltage | 230 Vca, 50 Hz |
Hopper | 20+20 lt |
Flow rate | up to 12+12 l/min |
Maximum pressure | 15 bars |
Grain size | up to 5mm |
Max Hose length | 20mt * |
Sizes | 50x60x60 |
Weight | 35 kg |
Pump type | Peristaltic |
SPRAYING
MAGIC PLUS P140 was specifically designed for spraying DUAL COMPONENT materials, with the facility to set multiple mix ratios.
Thanks to the use of just one Magic Plus P140 grout pump, also the normal procedures performed by the other models are still available.
FILLING
Perfect for injecting cement slip and materials of various types into walls, micropiles and prestressed structures.
Designed to consolidate or seal the surface of masonry, rock, damns and tunnels.
INJECTION
with 0 to 6 pressure control
POINTING
MAGIC PLUS P140 can work with premixed plasters and traditional mortars, with particle size of 0 - 5 mm, on brickwork, facing brick, porphyry blocks, slabs of various types, stonework and pebble of various sizes.
ADVANTAGES
Designed for the use of dual component materials.
High power to adapt to all kinds of work sites.
Thanks to its compact size and low weight, MAGIC PLUS P140 is perfect for all work site needs.
Easy to use, this unit is also suitable for home users and unskilled site labor.
Easy maintenance and cleaning.
MAGIC PLUS P80
Can point with premixed plasters and traditional mortars, with particle size of 0 - 5 mm, brickwork and facing brick, porphyry blocks, slabs of various types, stonework and pebble of various sizes.
TECHNICAL DATA SHEET
DC motor | 115 W |
Voltage | 230 Vca, 50 Hz & 12V battery |
Hopper | 6 lt |
Flow rate | up to 6 l/min |
Maximum pressure | 10 bars |
Grain size | up to 5mm |
Max Hose length | 15mt * |
Sizes | 37x40x40 |
Weight | 15 kg |
Pump type | Peristaltic |
POINTING
MAGIC PLUS P80 can point with premixed plasters and traditional mortars, with particle size of 0 - 5 mm, brickwork and facing brick, porphyry blocks, slabs of various types, stonework and pebble of various sizes.
The facility to regulate pump speed directly from the remote control makes it possible to change the flow rate of material, thereby allowing the system to be used in a broad variety of situations: from precision finishing joints to coarser joints between large size blocks or stone; the process can also be performed by just one operator because the machine can be stopped and started directly from the lance by means of the 12V remote control.
Low thickness coat
SPRAYING
Thanks to the many guns and accessories available the system can be used for spray application of premixes and traditional mortars, with particle size of 0 - 5 mm to obtain the desired finish quality.
FILLING
types into walls, micropiles and prestressed structures.
Designed to consolidate or seal the surface of masonry, rock, damns and tunnels.
Ideal for fixings, structural grouting, sealing and jobs that require pressure and flow rate no higher than 15 bar and 24 l/m.
INJECTION
with 0 to 6 pressure control
ADVANTAGES
Thanks to its compact size and low weight, MAGIC PLUS P80 is suitable for all work site needs.
Suitable for big and small jobs alike.
Easy to use, this unit is also suitable for home users and unskilled site labour.
Easy maintenance and cleaning.
MAGIC PLUS P60
Can point with premixed plasters and traditional mortars, with particle size of 0 - 5 mm, brickwork and facing brick, porphyry blocks, slabs of various types, stonework and pebble of various sizes.
TECHNICAL DATA SHEET
DC motor | 65 W |
Voltage | 230 Vca, 50 Hz & 12V battery |
Hopper | 6 lt |
Flow rate | up to 3 l/min |
Maximum pressure | 6 bars |
Grain size | up to 5mm |
Max Hose length | 10mt * |
Sizes | 37x40x40 |
Weight | 15 kg |
Pump type | Peristaltic |
POINTING
MAGIC PLUS P60 can point with premixed plasters and traditional mortars, with particle size of 0 - 5 mm, brickwork and facing brick, porphyry blocks, slabs of various types, stonework and pebble of various sizes.
The facility to regulate pump speed directly from the remote control makes it possible to change the flow rate of material, thereby allowing the system to be used in a broad variety of situations: from precision finishing joints to coarser joints between large size blocks or stone; the process can also be performed by just one operator because the machine can be stopped and started directly from the lance by means of the 12V remote control.
MICRO-INJECTION
For frescoes, detached plaster, etc.
Thanks to the extreme precision of this system and the facility to set output pressure from 0.1 to 1 bar it can easily replace conventional hand-operated injection guns.
ADVANTAGES
Thanks to its compact size and low weight, MAGIC PLUS P/60 is suitable for all work site needs.
Suitable for big and small jobs alike.
Easy to use, this unit is also suitable for home users and unskilled site labour.
Easy maintenance and cleaning.