Your cart
There are no more items in your cart
Intellispray IS30
Overview
This complete redesign of the spray polyurea and foam insulation will help you set yourself apart from competitors with a faster warm up, more spray time, and quality assurance for customers.
A Proportioner Reimagined For You
We heard your frustrations and tackled three key issues facing spray operators: high ratio errors, equipment breakdowns, and spray polyurea and foam machines that require too much expertise.
No More Off-Ratio Jobs and Re-Do’s
Independent, Servo-driven motors control the flow of A & B materials to maintain proper ratio
Ratio monitored and controlled from end of hose with greater than 99% ratio accuracy
Save up to 1.5 Hours/Day
Warm up in under 15 minutes, more consistent heat, higher outputs, and less downtime
Automated procedures and intuitive troubleshooting
Monitoring & Control Where it’s Needed
Monitor rig operations remotely with cellular connection
Adjust rig settings while spraying with IntelliSense Remote Control
PRODUCT SPECIFICATIONS
Max. Fluid Pressure | 155 bar (2,250psi) |
Max. Fluid Temperature | 93°C (200°F) |
Maximum Flow Rate | 13,65 kg/min (40 lb/min) |
Max. Hose Length | 76 m |
Operating Temperature Range | 0-30°C |
Line Voltage Requirements | 200-240 VAC 3-phase |
Full Load Amps | FLA 68A |
Frequency | 50/60 Hz |
Max. Fluid Inlet Pressure | 20.68 bar (300 psi) |
Min. Fluid Inlet Pressure | 50 psi (3.45 bar, 0.345 MPa) |
Fluid Inlet Sizes (A/B) | 3/4" JIC 12 |
Fluid Outlet Sizes (A/B) | 3/8" JIC 5 (A) JIC 6 (B) |
Fluid Circulation Ports (A/B) | 3/8" JIC 5 (A) JIC 6 (B) |
Dimensions (WxH/Depth) | 179 x 90 x 67 cm) |
Weight | 268kg |
Wetted Parts Materials | Stainless Steel, Aluminum, Plated Steel, Chemically Resistant Plastic, Chemically Resistant O-Rings |
Touch screen | 10 inches |
Improved Flexibility
Unique, 2-piece Mix Chamber and Tip design increases pattern flexibility and improves uptime
More Spray Time
Tip design reduces overspray build-up on the gun and keeps the sprayer spraying
Longer Life
High side seal life increases uptime and reduces spare parts cost
Reduce downtime
Unique, integral check valve prevents crossover of material in the air passages
Chromium Nitride coating improves gun body life makes clean-up a breeze
Reduce Fatigue
Balanced, lightweight design
Patented strap reduces hand/finger fatigue
Handle winglets reduces perlicue stress and helps operators maintain accuracy
Unique swivel allows strap to be changed from right to left and left to right quicikly and easily
Benefits of Using Servo Motors
Servo motors continue gaining in popularity due to three main factors: Precision, Torque, and Efficiency.
Precise Control and Accuracy: The servo motor receives a control pulse (or movement command) on average every 20 milliseconds, even if the order is to remain in the same position.
Torque: When you command the servo motor to move, it will do so to your selected position. From then on, it will hold that position even if external forces push against it.
Efficiency: Servo motors are inherently designed to be highly efficient over a wide operating range. The servo motor reaches more than 88% efficiency at 40% of its torque.